Matrix NAVAN CNX200, Системное руководство

Страница: 120 / 1388

110 Matrix NAVAN CNX200 System Manual
To know how to use change feature settings with SA Commands, please refer the description of individual features
under
“PBX Features”, “PBX Settings” and “Telephony Features and Facilities” .
For a complete list of SA Commands, refer “SA Commands” .
SA Password for programming from extensions
The access to SA mode may be protected by means of an SA password.
The SA password is code for preventing unauthorized access to the SA mode. The password can be a minimum of
4 digits to a maximum of 12 digits. The valid digits are from 0 to 9. The default, SA Password is 1111. It can be
changed and reset by the System Engineer.
Refer the topic “System Security” for instructions on how to change and reset the SA Password.
• You can enter SA mode only from extensions which have the features 'SA Mode' and or 'SA Extension'
enabled in their Class of Service.
• When the feature 'SA Extension' is enabled in the Class of Service of an extension, the extension will
always be in SA mode. You do not need to enter SA mode by dialing the SA password. You can enter
the SA mode by dialing the SA command prefix string.
• When the feature 'SA Mode' is enabled in the Class of Service of an extension, dialing of the SA
Password is required to enter the SA mode. SA Commands can be dialed only after successfully
entering the SA Mode.
• There is no restriction on the number of persons who can simultaneously enter and operate from the
SA mode using a telephone.
Entering SA Mode using a Telephone
You may use an Extended IP Phone or an SLT extension of the NAVAN to enter the SA Mode.
To enter SA mode from an extension phone,
•
Dial 1#92-SA Password
17
• You get a confirmation Tone of the NAVAN to indicate successful entry into the SA mode.
• Dial SA Command strings: 1072-Feature Access Code.
• You get a confirmation tone and text message on the phone display.
• Replace handset to exit SA mode.
You can exit from the SA mode automatically or manually. To exit the SA mode automatically, you must
configure the SA Mode Timer. This Timer can be set to a desired duration between 000 and 255 minutes.
On the expiry of the set time, the system disconnects the extension phone from the SA mode. By default,
the SA Mode Timer is set to 003 minutes. The Timer is loaded every time a new SA command is issued.
17. You may use the default SA password, 1111, if the password has not been changed already. If the password has been changed,
use the new password.
When you dial this command, the system will check if the facility 'SA Mode' is enabled in the Class of Service allowed to the exten-
sion from which you have dialed this command. If the SA mode is not allowed, an Error Tone will be played. The Error Tone will be
played also when the SA password is entered incorrectly.
If the facility 'Allow SA Commands' is enabled in the Class of Service of the extension you are using, you can skip this step and
directly dial the SA Command (1072-<Command String>).