Matrix NAVAN CNX200, Системное руководство

Страница: 719 / 1388

Matrix NAVAN CNX200 System Manual 709
• Select the Store Outgoing Calls check box to enable storage of outgoing calls as per the filters you
set. If outgoing call storage is disabled, no outgoing call will be stored.
• If you want outgoing calls that exceed as certain duration to be stored, set the filter Store Calls with
speech duration more than (sec) to the desired duration. All outgoing calls with duration greater than
this value, will be stored.
• If you want outgoing calls exceeding certain metering units to be stored, set the filter Store Calls with
metering units more than (units) to the desired value. All outgoing calls that have metering units
greater than this value will be stored.
• Outgoing calls made by an extension user can be transferred to another extension. In such cases, you
may enable
Call Splitting if you want to charge the amount to each extension according to the duration
of speech that each extension was involved in the call.
• If Call Splitting is disabled, you have the option of charging the call amount either to the extension that
originally made the call, i.e. the Originating Extension, or to the extension that was last in speech on the
call, i.e. the Terminating Extension.
In the When Call Splitting is OFF, charge calls to field, select the desired extension you want to
charge the call to as Originating Extension or Terminating Extension .
• As the SMDR Outgoing call storage buffer is limited, you may limit the storage of calls to a certain
numbers only by configuring
Store Calls made to numbers matching with .
You may configure as many as 250 numbers. The system will store records of outgoing calls made to
these numbers only.
NAVAN uses the best match logic for storing these numbers. For example, if you configure 0 here, the
system will store all outgoing calls made to numbers starting with 0.
• Click Submit to save your Outgoing call storage filter settings.
• To configure storage filters for incoming calls, click SMDR Storage - Incoming Calls to expand,
• Select the Store Incoming Calls check box to enable storage of incoming calls as per the filters you
set. If incoming call storage is disabled, no incoming call will be stored.