manualshive.com logo in svg

Matrix NAVAN CNX200, Системное руководство

Поделиться
Скачать
Matrix NAVAN CNX200 Скачать руководство пользователя страница 790

780

Matrix NAVAN CNX200 System Manual

•

Direct RTP is not supported on SIP Trunks and Matrix SPARSH M2S clients. System will use RTP 
Relay for SIP Trunks and Matrix SPARSH M2S.

•

If RTP Relay or Direct RTP is selected, then number of simultaneous SIP-to-SIP calls varies as follows-

•

maximum 12 simultaneous audio calls or 6 simultaneous video calls are supported.

•

certain voice messages will not be played. See 

“Voice Message Applications”

 for more details.

•

If you change the RTP Mode, the system will release all ongoing calls.

•

If RTP Mode is set as 

RTP Relay

 or 

Direct RTP

, MoH will be played when the system holds any SIP end 

point. The MoH to be played in this condition depends on the selected MoH Vocoder Preference 
configured in the Jeeves.

Select the Vocoders in the order of their preference, for 

MoH Vocoder Preference 1

, 

MoH Vocoder 

Preference 2

 and 

MoH Vocoder Preference 3

.

Default: MoH Vocoder Preference 1 is G.729 AB, MoH Vocoder Preference 2 is G.711 A-Law, MoH 
Vocoder Preference 3 is G.711 



 Law.

NAVAN does not use the DSP resources to play the MoH if selected RTP Mode is either Direct RTP or 
RTP Relay. So, the MoH file must be different from the default MoH file already present in the system.

The default MoH file must be converted into respective codec’s format (codecs which are programmed in 

MoH Vocoder Preference1/2/3

 in the Jeeves) and the converted MoH will be played when the selected 

RTP Mode is either Direct RTP or RTP Relay.

 

For detailed instructions on how to convert the default MoH 

file to respective codec’s format, refer 

“Converting the Default MoH file into Respective Codec’s Format”

 in 

“Voice Message Applications”.

Quality of Service

Quality of Service (QoS) refers to priority of IP packets on network layer. QoS is configured for both signaling (SIP) 
and media (Voice, Video and Fax). NAVAN sends all the SIP signaling messages and the Media packets according 
to the QoS settings. To configure QoS for SIP (signaling) and Media:

•

Define the priority bits for SIP messages in the field 

SIP Diffserve/ToS

. The VoIP module sends all the 

SIP signaling messages with this QoS setting. Valid range is 00 to 63. Default: 26.

•

Define the priority bits for Voice packets in the field 

Voice DiffServe/ToS.

 The VoIP module sends all the 

Voice packets with this QoS setting. Valid range is 00 to 63. Default: 46.

Содержание NAVAN CNX200













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды