Matrix NAVAN CNX200, Системное руководство

Страница: 774 / 1388

764 Matrix NAVAN CNX200 System Manual
• If the Extension creating 3 party conference, disconnects during Conference , you can select either to
Transfer the call or to Disconnect the other parties.
• If you select to Transfer the call , the 3-party conference is converted into a two-way speech between
the other two parties.
• If you select to Disconnect other parties , all the parties involved in the 3-party conference are
disconnected.
For more details about 3-Party Conference, refer “Conference-3 Party” .
• Play Beep when Raid/Conference/Dial-in Conference begins: This is a common flag for three features
of NAVAN: “Raid” , “Conference - Multiparty” and “Conference Dial-In” . When this flag is enabled,
• the system plays a warning beep to the extension which is being raided by another extension, before
establishing three-way speech.
• the system plays beeps to the other participants in a Dial-In Conference when a new participant joins in
(i.e. dials in to an on-going Dial-In Conference)
• the system plays beeps to the other participants connected in a Multi-Party Conference, when a new
participant is included.
If you disable this flag, no warning Beep will be played in Raid, the existing participants in a Dial-In or Multi-
party conference will not hear any beep tone indicating the addition of a new participant.
• Play Beep when Call Taping and Conversation Recording Starts: This is a common flag for the
features “Call Taping” and “Conversation Recording” . When this flag is enabled, the system plays Beeps to
the extensions/calling party and extension before it starts taping the call in the common mailbox or
recording the conversation in the extension’s mailbox.
When this flag is disabled, no indication will be given to the opposite party when the call is being taped/
conversation is being recorded. Default: Enabled.
• Play Feature Tone in place of Dial Tone when Call Forward is Set: You can select whether the you
want the system to play Feature Tone instead of Dial Tone to the extensions when Call Forward is set on
these extensions. When this flag is disabled, the system will play dial tone to the extension on which Call
Forward is set, whenever the extension goes Off-hook. Default: Enabled.
• Ignore call forward set by member extension, when call is routed on Routing/Dept. Group: If you
want the system to ignore the call forward set by member extensions in a Routing Group/Department
Group and place calls on them, select this flag. Default: Disabled.
• Call Proceeding Tone–Multistage Dialing: This flag is used in “Multi-Stage Dialing” where you need to
configure Pause and Wait for Answer in the Substitute Number string for the number string dialed by the
extension users.
When an extension user makes a call using a Calling Card, and the system dials out the number using the
Multi-Stage, the extension user will get Ring Back Tone twice: first after the system has dialed the Calling
Card Number, and again after the system has dialed out the destination number (called party number).
Thus the extension user will get Ring Back Tone, twice. To avoid this, you may configure the 'Call
Proceeding Tone' to be played by the system when using Multi-Stage Dialing.