Matrix NAVAN CNX200, Системное руководство

Страница: 387 / 1388

Matrix NAVAN CNX200 System Manual 377
9.
If you want to enable Daylight Saving Time (DST) on the phone, set Apply Daylight Saving Time? to
Yes. Default: No.
The Daylight Saving Time convention followed in the country/region you selected will be automatically
applied. The IP phone will change its date and time settings according to the DST convention of the
selected country/region.
10.
Select the CO CLIP Pattern for the IP phone. This is the type of Calling Line Presentation on the phone for
incoming calls from trunks. You can select any of these options:
• Name Only (only the name of the caller will be displayed).
• Number Only (only the number of the caller will be displayed).
• Name (both the name and the number of the caller will be displayed).
Default: Name.
11.
Select the Language for the IP phone. Default: English.
NAVAN provides language support for English, French, German, Spanish, Portuguese, and Italian on the
Matrix IP Phone. When you select any of these languages, all the prompts and command strings will
appear in the selected language.
• SIP Extension users can change the language by accessing and navigating through the phone menu.
• The Language can be changed by logging into the SA Jeeves also.
12.
Select a Ringer Mode for the phone from the four options:
• Ring immediately (it rings immediately as a fresh calls lands on the phone).
• Ring if idle (rings only if the phone is idle).
• Ring after delay (if the call is still not answered).
• Silent (silent mode).
Default: Ring Immediately.
13.
If you select Ring after delay as Ringer Mode, set the Ring Delay Timer (sec) , if required, to the desired
value.
The Ring Delay Timer is the time in seconds the system waits on receiving a call before ringing on the IP
phone. The range of this timer is 0 to 99 seconds. Default: 10 seconds.
14.
If you want to enable Ringer Auto Acknowledge mode, set the Acknowledge Timer (sec) to the desired
value.
The Ringer Auto Acknowledge mode determines when to stop the ring on the IP phone. There are two
options for Ringer Auto Acknowledge:
•
Stop only when the call is answered.
• Stop after a delay.
To stop the ring on the IP phone after a delay, the Acknowledge Timer must be configured. The range of
this timer is 01 to 99 seconds. Default: 00 seconds.
To stop the ring only when the Call is answered or manually acknowledged, the Acknowledge Timer must
be set to '00'. By default, Ring Auto Acknowledge is turned OFF.