Matrix NAVAN CNX200, Системное руководство

Страница: 333 / 1388

Matrix NAVAN CNX200 System Manual 323
5.
You must resolve the conflict. Jeeves will not allow you to continue if you do not resolve conflict.
If you want to change the Feature Access Code that is conflicting with the extension number you have
assigned, change the Feature Code from the list located beside Extension Numbering Plan table.
6.
Assign names to extensions. The name you assign may be the name of the person who will use the
extension. Extension names may consist of a maximum of 18 characters.
SIP Extensions are licensed feature.
In the case of SIP Extensions, the number you configure as Extension Number will be considered as the
SIP ID.
7.
If you have finished assigning numbers and names, click the Submit button.
To assign the extension numbers all over again, click the Clear Extn. No. button on this page.
To default all parameters, click the Default button on this page.
To reach any specific station’s configuration page, click on that station port appearing under the Port
column.
8.
Reassign Feature Access Codes from the Feature table, if required. The new access code may be a
single digit or a sequence of a maximum of 6 digits. Digits 0 - 9, #, *, A, B, C, D, F, P are allowed.
9.
Click Submit to save changes.
If you assign the same Access Code to more than one feature, Jeeves will pop up an alert message and
ask you to resolve the conflicting codes. It will not allow you to submit until you have resolved the conflict.