manualshive.com logo in svg

Matrix NAVAN CNX200, Системное руководство

Поделиться
Скачать
Matrix NAVAN CNX200 Скачать руководство пользователя страница 29

Matrix NAVAN CNX200 System Manual

19

CHAPTER 3

Installing Matrix NAVAN

Before You Start

Before you begin the installation of the NAVAN, make sure you have the following items ready:

•

A suitable location to install the NAVAN.

•

Necessary telecom wiring in place, with wall jacks for extension lines at the required locations.

•

Standard, good quality, twisted pair telephone cables with 0.5 mm conductor diameter, with RJ11 plug. 

•

Appropriate cables and connectors to set up and test the Ethernet interface of the NAVAN and the LAN 
connection.

•

A dedicated Power supply outlet close to the system. 

•

For the 

FXS ports

, arrange for as many standard analog telephone instruments as required to connect as 

SLT extensions. You may select any standard telephone instrument like rotary phone, Pulse/Tone 
switchable push-button phone, Feature phone or Cordless phone. 

•

A fax machine, as required, to connect to SLT port.

•

For the 

FXO ports

, arrange for one or more active Analog, two-wire trunk lines, as required.

•

For the 

Mobile ports

, a SIM card to test mobile network connectivity, if GSM/UMTS module is present. 

•

SIP Account information to be configured in the system to test SIP calls.

•

Any standard SIP Phone or Matrix Extended IP Phone to register as SIP Extension of NAVAN, if required. 
The first 8 SIP Extensions you connect are free. 

To connect additional 8 SIP Extensions, you would need to purchase the IP8 License. NAVAN supports a 
maximum of 24 SIP Extensions.

•

A Voice Mail System module (VMS) is present in the form of an internal Pen Drive.You just need to 
purchase a License Voucher (provided by Matrix) to activate the Voice Mail System.

•

A standalone computer or a computer connected in a LAN to access 

Jeeves

, the web-based configuration 

tool of NAVAN.

Well begun is half done; plan your hardware installation well.

Содержание NAVAN CNX200













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды