Matrix NAVAN CNX200, Системное руководство

Страница: 1073 / 1388

Matrix NAVAN CNX200 System Manual 1063
Mobility Extension
NAVAN offers mobility to its extension users whose nature of work keeps them away from their desks frequently
and for longer durations.
Using mobility extensions, the extension users of NAVAN can make and receive their calls from their current
(remote) location, placing calls through the system, and can access the system just as any other normal extension
of the NAVAN.
How it works
NAVAN supports two types of users:
• Station Users: they are extension users of NAVAN to whom a dedicated physical extension is provided on
their desks.
• Virtual Users: they are extension users of NAVAN who share a physical extension, or may not have any
physical extension allotted to them.
The facility of Mobility Extension is provided to both virtual and normal extension users using the features
“Direct Inward System Access (DISA)” and “Call Forward” .
How to configure
To provide Mobility Extension to users, the follow the steps described below.
• List out the Extension Users and Virtual Users and configure them first.
• Make sure that extensions which are to be provided Mobility Extensions have the features Call Forward
and DISA enabled in their
“Class of Service (CoS)” .
• Make a list of External numbers to which the Mobility Extension users will forward their calls. Configure
these numbers in the 'Allowed List' of Local, Regional, National and International Numbers, as appropriate.
• The Toll Control assigned to the extension will be applied when a call is forwarded to an external number.
Make sure that the extensions which are to be provided Mobility Extension have the required
“Toll Control”
level for Call Forward to the External Numbers (the numbers you have programmed in the Allowed List).
Toll Control level is to be programmed on the Mobility Extensions.
• Configure the parameter 'External Call Forward for' on the Mobility Extensions. This parameter defines the
types of calls for which the External Call Forwarding is to be applied. Select any one of the options, Internal
Calls Only, Trunk Calls Only, In Trunk Calls as required.
• Program the parameter 'DISA' on the trunk lines on which Mobility Extensions users are to be provided
access to. Make sure you select the option 'CLI Auth. Multiple Calls' in the 'DISA' parameter of the trunk
port.
• Make a list of numbers which the Mobility Extension users will use to access the NAVAN from DISA mode.
Program this list of numbers in the “DISA-CLI Authentication Table”.
Program this list of numbers in the 'Calling Number' field of the Authentication Table. Program the 'Port
Type' and 'Port Number' of the Extension assigned to Mobility Extension Users in the 'Auto Login As' field