Magnetic Autocontrol MHTM MicroDrive, Руководство по эксплуатации

Страница: 130 / 196

Barrier MHTM
TM
MicroDrive
Parameterising control unit
130 5815,5001US / Version 02.66
10.10.7 Impact settings
Operating view

Main menu

Setup

Impact settings
Parameters Description
Impact response Select the barrier arm's impact reaction if the control unit detects an impact.

Also see page 126, chapter 10.10.3, parameter "Impact detection".
Options
 Open
After impact detection, the barrier arm is opened completely.
 Stop
After impact detection, the barrier arm's closing movement is stopped.
 Safe stop
After impact detection, the barrier arm's closing movement is first stopped
and then slightly opened.
Factory setting
 Open
Impact delay
After the control unit has recognized that, e.g., a vehicle roof was hit by the
closing barrier arm, the control unit tries to close the barrier again after the set
impact delay. Impact is possible if, e.g., a user tries to drive through the barrier
without permission.
The following conditions must be met for the barrier to close after the end of
the impact delay:
 In the "Automatic closing" parameter, the option must be set to "Automatic".
 The safety devices, such as safety loop or safety light barrier, must be
clear.
This parameter corresponds to the parameter "Impact delay" in the "Delays"
menu.
Setting range
 5 to 30 s
Factory setting
 5 s
Automatic closing Select signal for closing of the barrier arm after impact detection.
Options
 Automatic
The barrier arm automatically closes after the end of the impact delay.
 Signal
For the barrier arm to close, a signal must be applied to the input with the
function "Close" or "Close low priority".
Factory setting
 Signal
Table 46: Menu "Impact settings"