Magnetic Autocontrol MHTM MicroDrive, Руководство по эксплуатации

Страница: 143 / 196

Barrier MHTM
TM
MicroDrive
Parameterising control unit
5815,5001US / Version 02.66 143
10.15 Menu "Detector 1 (A-B)"
This menu is used to reference the induction loops A and B.
Operating view

Main menu
 
Detector 1 (A-B)
Parameters Description
Recalibration Start reference of the induction loops (activate)
Mode A Select position and function of loop A.
Options
 Inactive
Induction loop is not present or not relevant for evaluation.
 Active
The induction loop state is put on the output with function "Loop active".
Internally, the induction loop condition is not used.
 Safety loop
The induction loop assumes the function of the safety loop.

Opening entry
The induction loop assumes the function of the opening loop on the entry
lane.
 Open exit
The induction loop assumes the function of the opening loop on the exit
lane.
 Presence entry
The induction loop assumes the function of the presence loop on the entry
lane.
 Presence exit
The induction loop assumes the function of the presence loop on the exit
lane.
Mode B Select position and function of loop B.

For description, see parameter "Mode A".
Sensitivity A Set the response sensitivity of the induction loop A. The response sensitivity is
divided into increments.
Factory setting
 5
Setting range
 0…9
Sensitivity B Set the response sensitivity of the induction loop B.

For description, see parameter "Sensitivity A".
Frequency settings 
See page 144, Table 57
Information Displays information about the plug-in module "Detector 1 (A–B)". Here, the
serial number (SerNo), hardware version, software # and software version of
the plug-in module are displayed.
Table 56: Menu "Detector 1 (A-B)"