Magnetic Autocontrol MHTM MicroDrive, Руководство по эксплуатации

Страница: 132 / 196

Barrier MHTM
TM
MicroDrive
Parameterising control unit
132 5815,5001US / Version 02.66
Operating view

Main menu

Settings

Start-up behaviour (Start-up behav.)
Option Description
2
Reference run
In this option, the barrier initially performs a reference run. This means that the
barrier opens completely at low speed.
Release signal
A release signal must be applied for the barrier to be ready fro closing. The
release signal can be applied even before the voltage returns.
The release signal can be given by an external closing signal or by pushing the
left operating button at the control unit.
Closing behaviour
 Program modes 1 or 2:
If a safety loop is installed, the barrier closes only after a vehicle has
passed through and a permanent closing signal is pending. If only a safety
light barrier is installed, no passage is required. The barrier closes at once
when a permanent closing signal is applied.
 Program modes 3 to 8:
If a safety loop is installed, the barrier closes when the first vehicle has
driven through. If only a safety light barrier is installed, the barrier closes at
once when the voltage returns.
3
Reference run
In this option, the barrier initially performs a reference run. This means that the
barrier opens completely at low speed.
Release signal
A release signal must be applied for the barrier to be ready fro closing.
If the release signal is applied before return of voltage, the release signal is
ineffective. In this case, the release signal must be revoked and applied again
after the barrier opens.
The release signal can be given by an external closing signal or by pushing the
left operating button at the control unit.
Closing behaviour
 Program modes 1 or 2:
If a safety loop is installed, the barrier closes only after a vehicle has
passed through and a permanent closing signal is pending. If only a safety
light barrier is installed, no passage is required. The barrier closes at once
when a permanent closing signal is applied.

Program modes 3 to 8:
If a safety loop is installed, the barrier closes only after the first vehicle has
driven through. If only a safety light barrier is installed, the barrier closes at
once when the voltage returns.