Magnetic Autocontrol MHTM MicroDrive, Руководство по эксплуатации

Страница: 166 / 196

Barrier MHTM
TM
MicroDrive
Malfunctions
166 5815,5001US / Version 02.66
Number Description Possible cause Corrective action
FF37
ERROR Motor update failed An error occurred when
updating the software
 Perform reset.

See
page 167, chapter 13.4.
 Contact service if required.
FF3A
WARNING Motor update was
performed Message serves information
purposes –
Table 62: Warning and interference messages – motor GW
13.3.3 Warning and interference messages - Detector
Number Description Possible cause Corrective action
FF4A
ERROR Hardware error Internal HW function test failed
 Perform reset.

See
page 167, chapter 13.4.
 Contact service if required.
FF4B
WARNING Loop error A Short circuit or idle loop A  Remove loop error and
perform adjustment.
 If no loop is connected,
select the option "Inactive"
in the menu "Detector".
FF4C
WARNING Loop error B Short circuit or idle loop B  Remove loop error and
perform adjustment.
 If no loop is connected,
select the option "Inactive"
in the menu "Detector".
FF4D
WARNING Loop error C Short circuit or idle loop C  Remove loop error and
perform adjustment.
 If no loop is connected,
select the option "Inactive"
in the menu "Detector".
FF4D
WARNING Loop error D Short circuit or idle loop D  Remove loop error and
perform adjustment.
 If no loop is connected,
select the option "Inactive"
in the menu "Detector".
Table 63: Warning and Interference Messages - Detector