Magnetic Autocontrol MHTM MicroDrive, Руководство по эксплуатации

Страница: 134 / 196

Barrier MHTM
TM
MicroDrive
Parameterising control unit
134 5815,5001US / Version 02.66
Operating view

Main menu

Settings

Start-up behaviour (Start-up behav.)
Option Description
6
Reference run
In this option, the barrier arm stops initially.
Release signal
The barrier carries out a reference run after the left operating button on the
control unit is pressed.
Closing behaviour
 Program modes 1 or 2:
The barrier closes at once when a permanent closing signal is applied.
 Program modes 3 to 8:
The barrier closes at once after the barrier reference run.
7
Reference run
In this option, the barrier initially performs a reference run. This means that the
barrier opens at low speed.
Release signal
No release signal is required to close the boom.
Closing behaviour

Program modes 1 or 2:
The barrier closes at once when a permanent closing signal is applied.
 Program modes 3 to 8:
If a safety loop is installed, the barrier closes only after the first vehicle has
driven through or after closing. If only a safety light barrier is installed, the
barrier closes at once when the voltage returns.
WARNING!
Danger of injury from closing arm!

Visual contact to the barrier is required when the closing
signal is given.

No vehicles must stand below the barrier when the
closing signal is given.
Table 47: Menu "Start-up behaviour"