Magnetic Autocontrol MHTM MicroDrive, Руководство по эксплуатации

Страница: 121 / 196

Barrier MHTM
TM
MicroDrive
Parameterising control unit
5815,5001US / Version 02.66 121
10.7.6 Automatic Modes 5 to 8: Drive direction 2
In drive direction 2 "Opening loop

Safety loop", the automatic
modes are identical.
Closing boom
WARNING!
WARNING!
Danger from closing boom!
A closing boom may cause severe or lethal injury
to persons, bicyclers and cabriolet drivers!
Therefore:
– The maximum distance between opening loop
and safety loop must be not greater than max.
3.28 ft (1 m). In direction 2 "Opening loop

Safety loop", the barrier closes as soon as the
vehicle leaves the opening loop. This means, if
the distance is too large, the barrier closes
before the car has cleared the barrier.

See
page 50, chapter 7.
Drive direction 2: "Opening loop

Safety loop"
Mag00097
1 2
3 4
5
Fig. 47: Program modes 5 to 8, Passage in direction 2
1 Remote control, card reader, coin accepter, etc.
2 Barrier
3 Opening
loop
4 Safety loop
5 Passage in direction 2
In direction 2, the opening loop is driven on first. The barrier opens.
While the opening loop or safety loop is occupied, the barrier
remains open. When the vehicle has left both loops, the barrier
closes.
Hold-open time is not active in drive direction 2.
When the vehicle leaves the opening loop backwards, the barrier
closes at once.