Maeda CC1485S-1, Инструкции по эксплуатации, Страница: 92 / 370

84
Use this switch only when the moment limiter fails or a load
test of the crane is conducted.
•
ON: Insert the key into the switch. Turn the key clockwise
and then return it to the original position. The key
automatically returns to the "OFF" position when you
release your hand.
The operation stop function is cancelled for 10 minutes
after it is turned ON.
•
OFF: The key can be removed or inserted at this position.
NOTES
You will notice the following when the operation stop
function is cancelled.
• The red lamp of the rotating warning lamp turns on.
• The LED of the switch box lights up.
• The buzzer sounds continuously.
• The icon will be displayed on the monitor.
[Overriding / Turn stater key off to reset]
The above statuses will change as follows 30 seconds
before the operation stop fuction returns from the cancelled
state.
• The LED of the switch box blinks.
• The buzzer additionally emits intermittent sound.
• Another icon will be displayed additionally on the monitor.
[Stop operation / Overriding soon stops]
However, these behaviors are subject to change depending
on the status of the Machine body.
Although the boom lowering and extending operations slow
down when the operation stop fuction is cancelled, this is
normal.
By turning the engine key OFF, the Machine can be
restarted even before 10 minutes have passed.