Maeda CC1485S-1, Инструкции по эксплуатации, Страница: 224 / 370

216
[3] STARTING ENGINE
Verify that the lock lever of both the normal machine and failed machine is at the lock
position. In addition, verify that each operation lever is at the neutral position.
1. Verify that the clips are securely connected to the battery terminals.
2. Start the engine of the donor machine and increase the engine speed to full speed (highest speed).
3. Set the starter switch of the failed machine to the "START" position and start the engine.
If the engine does not start, wait for more than 2 minutes before next attempting to start.
NOTES
See “Operation 3.3 Starting Engine" for how to start the engine.
[4] DISCONNECTING BOOSTER CABLE
When the engine has started, disconnect the booster cable in the reverse order of connecting the
booster cable.
1. Disconnect the clip of the booster cable (B)
connected to the revolving super structure
frame of the failed machine.
2. Disconnect the clip of the booster cable (B) to
the (-) terminal of the battery of the donor
machine.
3. Disconnect the clip of the booster cable (A)
connected to the (+) terminal of the battery of
the donor machine.
4. Disconnect the clip of the booster cable (A)
connected to the (+) terminal of the battery of
the failed machine.