Maeda CC1485S-1, Инструкции по эксплуатации, Страница: 262 / 370

254
[ADJUSTMENT]
• Do not loosen plug (1) for more than one turn.
Loosening for more than one turn gives rise to the
risk of plug (1) flying out because of the grease
inside at a high pressure.
In this stage, do not loosen any parts except the
plug (1).
Also, do not position your face in the direction
where plug (1) is mounted.
• If the rubber track is not loosened by the procedure
described here, request us or our sales agency for
repair.
If the result of test indicates that the tension differs from
the standard value, adjust it in the following manner:
[STRENGTHENING THE TENSION]
• Have a grease pump available.
1. By using the grease gun, inject the grease through the
grease plug (2) opening.
2. To ensure that a proper tension is applied, keep the
engine at an idling speed to travel forward for a
distance equal to the length of rubber track in contact
with the ground, and slowly stop travelling.
3. Check the tension of rubber track again.
If the tension is not appropriate, make another
adjustment.
CAUTION
Until dimension (S) reaches "0mm", grease can be
injected. However, if the tension is not enough,
abrasion of pins and bushings is increasing.
As reversing or replacement of pins and bushings is
required, contact us or our sales agency for repair.