Maeda CC1485S-1, Инструкции по эксплуатации, Страница: 348 / 370

340
23. Insert the position pins (C1, C2) into the bracket (26) on
the right side of the Main boom tip. At this time, be sure to
turn over the ring of the linchpin to lock securely.
24. Pull the No. 1 Fly-jib (2) toward the tip side.
25. After pushing the No. 1 Fly-jib (2) into the Fly-jib stowage
bracket B (22), insert the position pin (A1) into the Fly-jib
stowage bracket B (22) hole and insert the linchpin. At
this time, be sure to turn over the ring to lock securely.
Be sure to insert the position pin (A1) in a downward
direction from the above. If they are inserted in an upward
direction from the lower part, the position pins could fall
off and the Fly-jib could drop, causing a serious accident.
26. Insert the position pin (B1) into the hole closest to the
front of the Fly-jib stowage bracket A (21) and insert the
linchpin. At this time, be sure to turn over the ring to lock
securely.
27. Hang the single hook (10) on the hook stowage rope (13).
While pressing the hook stowage switch, perform winch
raising operation to remove the slack of the wire rope
(12).
Do not perform hook stowage operation with the override
switch left ON. Doing so does not change the mode to the
hook stowage mode, and the bracket, boom, wire rope
(12), etc. of the hook stowage rope (13) are damaged.
When performing hook stowage operation, be sure to use
the hook stowage switch.