Maeda CC1485S-1, Инструкции по эксплуатации, Страница: 127 / 370

119
2.9 FUSIBLE LINK
Be sure to turn the starter switch to the "OFF" position when checking or replacing a
fusible link.
CAUTION
A fusible link refers to large fuse wiring installed in the circuit through which a large
capacity current flows.
As with a normal fuse, this protects electrical equipment and wiring from burning due to
abnormal current.
• If a fusible link has melted, always check the cause in the circuit and fix the problem before
changing the fusible link.
• Always make sure the replacement fusible link is of the same capacity.
The fusible link is located on the left side in the battery
room.
If the following phenomena occur, a fusible link is
considered to be broken. Open the battery room and
inspect and replace the fusible link.
•
If the starter does not operate when the starter switch is
turned to the "START" position, the fusible link (2) is
considered to be broken.
•
If it is difficult, when cold, to start the engine when the
starter switch is turned to the "HEAT" position, the fusible
link (1) is considered to be broken.
[Fusible link capacity and circuit name]
Systems and capacities of fusible links are as follows:
No.
Connector
No.
Capacity Circuit name
(1)
FL1 120A
Mainly related to engine (glow, fuel
pump)
FL2 30A Fuel pump
FL3 60A Glow
(2)
FL4 45A Continuous power
FL5 45A Battery power (ACC)