Maeda CC1485S-1, Инструкции по эксплуатации, Страница: 194 / 370

186
3. Operate the right work equipment operation lever (2) to
the "Lower" side (push forward) and lower the hook
block to near the normal stowage position.
NOTES
At this time, do not lower the hook block (3) excessively.
If it is excessively lowered, the loosened hook block (3) may
damage the peripheral equipment.
4. Remove the rope for stowage (4) from the rope hook (5).
5. Hang the rope for stowage (4) on the hook block (3).
6. Operate the right work equipment operation lever (2) to
"Lower" side (push outside) to lower the boom to the end.
NOTES
At this time, hoist the hook block (3) occasionally to reduce
slack in the wire rope. At this time, be careful not to allow
the hook block (3) and rope for stowage (4) to be
overtightened.
7. Operate the right work equipment operation lever (2) to the
"Hoist" side (pull toward you) to hoist the hook block and
tighten the rope for stowage (5).
NOTES
At this time, do not overhoist the hook block (3).
If it is overhoisted, the rope for stowage (4) may cause
damage the vicinity of the normal stowage position at the
front of the revolving super structure.