
185
3.22.2 CRANE STOWAGE OPERATION AT THE TIME OF NORMAL STOWAGE OF
HOOK BLOCK
•
When storing the hook block, carefully operate the right and left work equipment operation
levers. Otherwise, the hook block may sway considerably, not only damaging the
peripheral equipment but also causing serious physical injury.
•
Raise the boom to near the hook block stowage position. If the hook block is away from
the stowage position, the hook block may come off, not only damaging the peripheral
equipment but also causing serious physical injury, when the hook block is going to be
hung on the rope for stowage.
CAUTION
•
Stop the sway of the hook block before storing the
hook block in the simple stowage position.
•
Be careful not to lower the hook block excessively so
that the hook block does not fall sideways on the
ground. Doing so results in irregular winding of the
winch drum.
•
The boom “Retracting” operation will lower the hook
block. The hook block also lowers with the boom
“Lowering” operation. Perform the hoisting operation
simultaneously so that the hook block does not fall
sideways on the ground.
1. Operate the left work equipment operation lever (1) to the
"Retract" side (pull toward you) to retract the boom fully.
NOTES
The hook block lowers with the boom retracting operation.
Perform the hoisting operation as appropriate and hoist the
hook block.
2. Operate the right work equipment operation lever (2) to the
"Raise" side (pull inside) and raise the boom up to the
position where the hook block nears the normal stowage
position.
Содержание CC1485S-1
