Maeda CC1485S-1, Инструкции по эксплуатации, Страница: 320 / 370

312
1. Pull the linchpin of the position pin (B1) of the stowage bracket
A (21) and pull out the position pin (B1).
Insert the pulled out position pin (B1) into the hole for pin
stowage at the back of the stowage bracket A (21). Securely
lock with the linchpin after insertion.
2. Pull the linchpin out from the position pin (A1) in the Fly-jib
bracket B (22) to pull out the position pin (A1).
NOTES
The removed position pin (A1) will be required for the later
operation of installing the Fly-jib to the lower part on the left of
the Main boom tip.
3. Pull out the position pins (C1, C2) from the bracket (26) on the
right side of the main boom tip.
NOTES
･
The removed position pins (C1, C2) will be required for the
later operation of installing the Fly-jib to the lower part on the
right of the Main boom tip.
4. Holding the handle (H4) of the No. 1 Fly-jib (2) with the
position pin (B2) of the stowage bracket A (21) as a fulcrum,
pull it out to the Main boom tip side and align the bracket (26)
holes (A, B) on the right side of the Main boom tip with the hole
positions of the No. 1 Fly-jib (2) connection.
When pulling out the No. 1 Fly-jib (2), hold the handle (H4)
instead of the pin holes to perform work.