Maeda CC1485S-1, Инструкции по эксплуатации, Страница: 212 / 370

204
5.2.2 HOISTING MACHINE WITH BOOM
• See "SPECIFICATION 1. MAIN SPECIFICATION TABLE" for the dimensions and mass of
this machine.
• A person who uses the crane to perform hoisting operation must have the crane operation
qualifications.
• Do not perform hoisting operation with a worker placed on the machine.
• Only use a sling (e.g. wire rope and shackles) which is approved and capable of lifting the
mass of the machine.
• Put the machine into a level state when lifting.
• When performing lifting work, place the lock lever at the lock position to prevent the
machine from moving unexpectedly.
• Never get under or around the lifted machine.
• Be sure to lift the machine only in the following procedure and at the sling installation
position (right and left bracket hole position of the boom at two locations). If the machine
necessarily needs to be lifted in other manner, consult us or our sales service agency.
CAUTION
• When lifting the machine, use two wire ropes for slinging of the same standard and two
shackles.
• Wire rope: Breaking load 78.9 tons
• Shackle: Working load 14.0 tons
• When lifting the machine with the boom raised, be sure to hang the hook block on the rope
for stowage. Be careful not to overtighten the rope.
When lifting the machine, perform the following on a firm,
level ground.
1. Retract the boom fully, raise it to 65 - 70 degrees and hand
the hook block on the rope for stowage for simple stowage.
2. Slew the revolving super structure so that the sprocket (A)
is in the front of the machine.