Lupus Electronics XT 1 Plus, Руководство пользователя

Страница: 95 / 332

95
Siren settings
Sirens
This menu consists of two parts. The upper part allows you to transmit settings to all
connected indoor and outdoor sirens. The lower part lists your connected sirens and
allows you to enter the sensor edit menu of the sirens.

This menu allows you to configure “external” sirens that are added to the alarm
panel. It is
not possible to configure the internal siren of the alarm panel in this
menu.

All settings in this menu are only transmitted and saved on the siren(s). The web
interface does not display the current setting of the sirens. After the transmission,
the alarm panel displays the setting as again.

To transmit the selected setting, select or and press “Apply now”.

The sirens will sound a notification sound to acknowledge that the new settings
have been received.

The new configuration is send to all connected sirens. If you want to set multiple
sirens differently, you need to add them later to the alarm panel or temporarily
disconnect the ones you do not want to change from their power supply.

It is not possible to display the current setting of a siren.

Tamper on/off
Deactivates the tampering contact of all currently connected “external” sirens for one
hour (useful e.g. to change the batteries).
Please note:

If the tampering contact is disabled, the siren does not transmit status updates to
the alarm panel anymore. For that time, you cannot see the current status of the
tampering contact via the menu “Sensors”
 “List”  “Sensor list”.

Attention! If you open the siren without disabling the tampering contact, the
acoustic alarm of the siren will sound – even if the siren is not connected to the