Lupus Electronics XT 1 Plus, Руководство пользователя

Страница: 316 / 332

316
Sensitivity settings:
You can set the sensitivity of the Shock sensor in the menu “Sensors”  “List”  “edit.”
Sensor sensitivity:
You can choose between two types and three different sensitivity settings: low, medium,
high.
Type:

If you choose “shock”, the vibration sensor only requires a single shock or a single
push in order to trigger an alarm.

If you choose “Vibration” (recommended), the vibration sensor requires at least
two Shocks within 20 sconds to trigger an alarm.
The lower you set the sensitivity, the stronger the shock needs to be in order to trigger an
alarm.
Please note:

In order to transmit a sensitivity setting, you need to start the learn mode of the
sensor by pressing the learn button for a few seconds. The red LED lights up for
maximal ten seconds. Press “OK” in the browser interface during this time to
transmit the sensitivity settings. The LED will immediately be switched off and
briefly light up again (dimmed).

If you set the Shock sensor to “24 hour alarm” (24HR), even opening a protected
window while the alarm panel is disarmed might trigger an alarm.

If you set the sensor sensitivity to “high”, even a very light shock can trigger an
alarm. Be aware that construction vehicles, lorries and other sources of vibrations
can cause an alarm if this sensitivity is selected.