Lupus Electronics XT 1 Plus, Руководство пользователя

Страница: 327 / 332

327

If you connect multiple repeaters, the distance between the repeaters should also
be at least 10 meters (10.9 yards).

All repeaters need to be added to the alarm panel.

You need to add a sensor to all repeaters that are used for the transmission of its
signal to the alarm panel.
Repeater chain:
Example:

The sensor needs to be added to all repeaters (A, B, and C).

If you connect more than one repeater in a chain (C  B  A  alarm panel), you
need to add the most distant wireless repeater to the next nearer one (C added to
B, B added to A).
o
Add repeater C to B. Do not add repeater B to C.
o
Add repeater B to A. Do not add repeater A to B.
o
Add repeater A to the alarm panel.
Adding a repeater to another repeater:

In order to add repeater C to repeater B, you need to start the learn mode in
repeater B. Press the “”learn button (sensor)”.

Press the “learn button (alarm panel)” of repeater C.

If the adding was successful, both repeaters emit a notification sound.

Connect a sensor always to the closest wireless repeater V2. Sensors that are not
installed at a fixed location (e.g. remote control) can be added to more than one
repeater.

All sensors also need to be added to the alarm panel.
Repeater mesh:
Example 1: