Lupus Electronics XT 1 Plus, Руководство пользователя

Страница: 176 / 332

176
Installation:

The sketch above shows the how the sensor and the magnet can be placed. Other
installation positions are possible.

We advise to install the sensor at the door or window frame and the magnet on the
door leaf or window casement.

Install the magnet at the side of the door or window and attach the door contact to
the frame. Observe the markings (9) to position the magnet exactly. The magnet
may not be more then 20mm from these markings when window or door is closed.

If the distance between sensor and magnet is sufficient, you can use one door
contact for a counter window.

If you install the sensor at the bottom of a window, you can still tilt the window
without triggering an alarm. We advice you to
not install the contact in this fashion,
since it can be a security risk.

When installing the door contact, we advice you to use the supplied screws and
dowels.
o
Alternatively, you can also use the supplied adhesive tape. However, due
to the nature of glue, it is possible that the adhesive tapes need to be
replaced after several months/ years (depending on humidity, temperature
changed, etc.). We offer additional adhesive pads on our homepage.

Do not install the door contact directly on metal or steel doors. Use rubber coating
to counter radio interferences.

Do not bridge JP1! Otherwise, the door contact will not answer to the regular
battery supervision of the alarm panel.