Lupus Electronics XT 1 Plus, Руководство пользователя

Страница: 300 / 332

300
Temperature sensor with display V2
Attention:
This product is
not compatible with the XT1 or XT2 without “Upgrade dongle to XT2
Plus.”
The temperature sensor with display V2 measures the temperature and humidity at the
place of installation, displays the information, and transmits any change of temperature
directly to the alarm panel every ten minutes.
Product description :
1.
Display
Temperature indicator in degrees
Celsius or Fahrenheit
Connection established to the alarm panel
Battery almost empty
RH = Humidity %
2.
Learn button

Press this button to add the temperature
sensor to the alarm panel. Further
information is provided in the following.

Pressing the button briefly activates the
background light of the display.
3.
Housing lock
4.
Celsius / Fahrenheit switch (JP1)
Bridge the two upper of the three pins to display
the temperature in degrees Celsius. Bridge the
two lower pins to switch to Fahrenheit (restart
required).
5.
Back
The back of the temperature sensor has two
notches to fix the housing to the wall with
screws.
Battery:
The temperature sensor requires three AAA 1.5 V alkaline batteries. The average battery
life is at least one year. The sensor will inform the alarm panel in case of a battery running
low.
Connecting the temperature sensor and putting it into operation
1.
Slide the plastic lock on the bottom of the temperature sensor to the left and open