Lupus Electronics XT 1 Plus, Руководство пользователя

Страница: 228 / 332

228
Battery:
The medical emergency controller requires a CR2032 3 V lithium button cell. The average
battery life is approx. four years (if trigger twice a day). It is not possible to exchange the
battery of the medical emergency controller, the complete controller needs to be replaced.
Activate battery status indicator:
If required, you can activate the battery status indicator (supervision function). For this
purpose, press the alarm button for minimum 15 seconds and ignore the LED signals at
one and eight seconds. The medical emergency controller will flash three times after 15
seconds to confirm the activation. Once this function is activated, it is not possible to
deactivate it again.
Necklace and wristband:
At the two sides of the medical emergency controller, there are two notches for the
attachment of the wristband or the necklace. You need to insert the two metal rods with
the springs into these notches.
Please use the provided tool (the 5cm metal plate) for the installation of the metal rods.
Disassembly:

Use the pointed side of the tool (the metal plate) to press the ring at one end of
the metal rod.

The spring of the metal rod is pushed in and you can remove the necklace or
wristband.

Make sure that the metal rod does not blow away by the pressure of the spring.
Assembly:

Insert the metal rod through the mount of the necklace or wristband.

Insert the metal rod into one of the notches of the medical emergency controller.

Use the tool to press in the spring at the loose side of the metal rod.

The spring is pushed in and you can insert the metal rod into the second notch of
the medical emergency controller.

Check that the necklace or wristband is fixed tightly.