Lupus Electronics XT 1 Plus, Руководство пользователя

Страница: 116 / 332

116
Switch
(PSS)
device
on/off
PSS PSS: test,1234,1,2,0
Use this command to switch wireless power supply
devices and in-wall relays on or off.
First value (1)  Area number 1
Second value (2)  PSS zone number 2
Third value (0)  0 Switch-off command
1 Switch-on command
2 Switch-over command
Restart RESET RESET: test,1234,10
Use this command to restart the alarm panel, e.g. if
the web interface froze.
10 stands for the delay time after how many seconds
the alarm panel is to be restarted after the receipt.

SMS P-word
Is not supported so far and can be ignored.

Send SMS
To send a test message via the SIM card, go to “Send SMS”. A window opens in
which you enter the mobile number and a text for the test message.
Phone number:
Enter the phone number to which you want to send the test SMS. If you are sending the
SMS to another country, make sure to enter e.g. 0049 (for Germany) before the number.
Do not use the + symbol instead off 00.
Text:
Enter a text for the SMS. A text is required.
Please note:

If the alarm panel does not recognize the SIM card anymore, e.g. when checking
for card credit, disconnect the power supply (including the emergency battery) and
restart the alarm panel.

Some prepaid SIM card must be used regularly, as they will be blocked by the
provider otherwise!

MultiSIM or partner cards are not supported and cannot be used.