manualshive.com logo in svg

LUMENIS PULSE 120H, Руководство оператора, Страница: 65 / 137

Поделиться
Скачать
LUMENIS PULSE 120H Скачать руководство пользователя страница 65

 

Shutting Down the System

Lumenis Pulse 120H UM-10012510 Rev. F

Page 65

Shutting Down the System

1.

Press the main 

On/Off

 button and wait until the system powers down.

• Normal System Shut-Down: perform a normal system shut-down 

from the control screen by selecting 

Shutdown

 from the cogwheel 

icon.

• Forced System Shut-Down: press the main 

On/Off 

button for at 

least five seconds (long press).

NOTE:

Use the Forced System Shut-Down method only when the system does 
not respond.

2.

Disconnect the delivery system from the laser. 

• If the delivery system is single-use, discard it. If it is multiple-use, 

prepare the delivery system for reuse as instructed in the appropriate 
delivery system instruction guide.

3.

Turn off the mains circuit breaker.

4.

Remove the main power plug from the wall receptacle. 

5.

Remove the footswitch connector from the laser.

Содержание PULSE 120H










































































































































Отзывы:

Нет отзывов