Removable or Lockable Wall Socket and Plug Configurations
Lumenis Pulse 120H UM-10012510 Rev. F
Page 126
Removable or Lockable Wall Socket and Plug Configurations
If the laser is installed with a removable plug or wall socket and lockable
plug combination prior to installation, the customer’s engineer or
electrical contractor will be responsible for ensuring that the proper
electrical requirements are available at the site.
When installed with a removable or lockable wall plug, the socket and
wall plug connection must be rated for higher than the electrical
requirements of the specific configuration. In most instances, customers
must purchase a suitable electrical connection kit locally.
Compliance With International Standards
In accordance with regulations a recommended routine inspection and
maintenance schedule is provided in the
System Requirements and
General Information
section of this manual.
In compliance with these standards, the system is equipped with the
following:
Emergency Stop Button
The laser has an emergency stop button knob that, when pushed,
immediately disables the laser in emergency situations.
Keyswitch
Laser energy can be emitted only when the keyswitch is turned to the
Open
position. The key can only be removed in the off position, and the
laser only operates with the key in place. When treatment is complete,
always remove and secure the key to prevent unauthorized use of the
laser.
WARNING:
Unauthorized use of this system may expose the operator/patient to poten-
tial electrical energy and laser radiation hazards.