Troubleshooting and Maintenance
Lumenis Pulse 120H UM-10012510 Rev. F
Page 112
Troubleshooting and
Maintenance
Handling Error Messages and Notifications
Notifications and error messages appear in the
Notification bar
at the
bottom of the screen. If you press
READY
while there is an error, it opens
the
Notification
screen. You can also open it from the notification bar as a
pop-up by pressing the
Show Notifications
button. Refer to
Figure 76
.
1.
Follow the instructions for the error message or notification.
2.
For notifications, press the
Acknowledge all
button.
• A check mark will appear to show that you have acknowledged the
message and the notification will fade.
• If the notification is ignored, it will remain in the list.
• If it is an error message, depending on the severity of the error, the
system may require a restart or to be shut down and not operated
until serviced professionally.
3.
For errors, perform the required task as detailed in the error message.
If the error is fixed, the message will fade and no longer appear in the
notification bar.
If the error is not corrected by a user action, the error will not fade and
you will be prevented from lasing.
4.
Repeat for each error message and notification.