LUMENIS PULSE 120H Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 137

LUMENIS PULSE 120H Скачать руководство пользователя страница 2

Lumenis Pulse 120H UM-10012510 Rev. F

Page 2

This manual is copyrighted with all rights reserved. Under copyright laws,
this manual may not be copied in whole or in part or reproduced in any
other media without the express written permission of Lumenis. Permitted
copies must carry the same proprietary and copyright notices as were
affixed to the original. Under the law, copying includes translation into
another language.

Please note that while every effort has been made to ensure that the data
given in this document is accurate, the information, figures, illustrations,
tables, specifications, and schematics contained herein are subject to
change without notice.

Lumenis, the Lumenis Logo, Lumenis Pulse 120H, SlimLine, Xpeeda and
Moses are trademarks or registered trademarks of Lumenis.

CAUTION:

In the USA: Federal law restricts this device to sale by or on the order of a
physician.

Copyright © Lumenis Ltd.

Catalog Part Number: UM-10012510
March 2017
Revision F

Directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE)

In  accordance  with  Directive  2012/19/EU  on  Waste  Electrical  and
Electronic  Equipment  (WEEE),  any  item  which  is  marked  with  the
crossed-out  wheelie  bin  symbol  must  not  be  disposed  of  as  unsorted
municipal  waste,  but  segregated  from  other  waste  types  for  eventual
treatment and recovery at an approved recycling facility.

By returning waste electrical and electronic equipment via the correct
segregated disposal channel, users can ensure the environmentally sound
treatment and disposal of the waste equipment, thereby reducing the
potential for any environmental or health risks that could arise as a result
of incorrect disposal.

Lumenis provides web-based collection, recycling and reporting
arrangements to the business end-user for equipment marked with the
crossed-out wheelie bin.

Please visit

http://www.lumenis.com/Service-Support/Recycle

to under-

stand what arrangements Lumenis has made in each EU Member State.

«
1
2
3
4
...
»

Содержание PULSE 120H










































































































































Отзывы:

Нет отзывов