manualshive.com logo in svg

LUMENIS PULSE 120H, Руководство оператора, Страница: 116 / 137

Поделиться
Скачать
LUMENIS PULSE 120H Скачать руководство пользователя страница 116

 

“Popping” or “Tapping” Coming Sound from the Fiber Port

Lumenis Pulse 120H UM-10012510 Rev. F

Page 116

“Popping” or “Tapping” Coming Sound from the Fiber Port

This is probably due to a malfunction of the fiber connector.

1.

Replace both the fiber and the debris shield.

Fiber Burn Back

Fiber burn back may occur during prolonged procedures, especially when 
using higher power.

1.

 Renew the fiber tip by stripping and cleaving the fiber.

Power Limited

A limitation may be the result of a specific fiber that is used.

1.

Choose appropriate fiber type for increased power.

Fiber Expired

1.

Replace the fiber with a new one and resume normal operation.

2.

If problem persists, contact Lumenis Service.

Unrecognized Fiber

1.

Replace the fiber with a Lumenis compatible one and resume normal 
operation.

2.

If problem persists, contact Lumenis Service.

Содержание PULSE 120H










































































































































Отзывы:

Нет отзывов