Lucent Technologies 5ESS-2000, Инструкции по эксплуатации и техническому обслуживанию

Страница: 997 / 1421

Response: RCV-196 COMPLETED
or
RCV MENU APPRC COMPLETED
11.53.23 Restore DS1 Facility to Service
1. At the MCC, type and enter the following command:
32
fg (1511,b,cde,a CMD)
or
RST:DS1SFAC=
a-b-c-d-e-f-g;
Where:
a = SM-2000 number
b = DNU-S number
c = Data group number
d = STE facility number
e = STS-1 facility number
f = VT1.5 facility group number
g = VT1.5 facility member number.
Response: RST DS1SFAC a b c d e f g COMPLETED
NOTE: No REPT DS1SFAC or CGA output messages should be seen for this facility.
2. Repeat step 1 for each DS1 Facility being grown.
11.53.24 Verify VT1.5/DS1 Facility at MCC
1. At the MCC, type and enter the following command:
1511
,b,cde,a
Where:
a = SM-2000 number
b = DNU-S number
c = Data group number
d = STE facility number
e = STS-1 facility number.
NOTE: Verify that the DNU-S VT1.5/DS1 facility has no associated CGA and remains in service.
2. Repeat step 1 for the parent STS-1 of each VT1.5/DS1 Facility being grown.
11.53.25 Backup Office Dependent Data
NOTE:
Prior to the response, there will be completed responses for each SM/SM-2000, the AM, and the CMP if
applicable.
1. At the MCC, type and enter the following command:
BKUP:ODD
;
235-105-210 October 1999
Copyright © 1999 Page 11