64
WWW.LCMETER.COM
LCI40
Series IOM
6 oPeration
C6.6 Special Functions
C6.6
Special Functions
-
C6.6.1
Reset Errors
Reset Errors?
Select: No / Yes
C6.6.2
Save Settings
Save current settings
Select:
Break (exit function without saving) / Backup 1 (save in storage location 1) /
Backup 2 (save in storage location 2)
Query: Continue To Copy? (cannot be undone)
Select:
No (exit function without saving) / Yes (copy current settings to storage backup 1 or backup
2)
C6.6.3
Load Settings
Load saved settings
Select:
Break (exit function without loading) / Factory Settings (restore factory settings) / Backup 1
(load data from storage location 1) / Backup 2 (load data from storage location 2)
Query: Continue To Copy? (cannot be undone)
Select:
No (exit the function without saving) / Yes (load data from the selected storage location)
C6.6.4
Password Quick Set
Password required to change data in the menu “Quick Setup”
0000 (= to menu “Quick Setup” without password)
xxxx (password required); range 4 digits: 0001 - 9999
C6.6.5
Password Setup
Password required to change data in the menu “Setup”
0000 (= to menu “Quick Setup” without password)
xxxx (password required); range 4 digits: 0001 - 9999
C6.6.6
Date and Time
Set real time clock
C6.6.7
Quick Access
Set “Quick Access” function;
Select:
Off (deactivated) / Reset Totalizer 1, 2, 3 or All Totalizers
6.4 Function tables
No.
Function
Settings / Descriptions
C6.5 Graphic Page
C6.5
Graphic Page
-
C6.5.1
Select Range
Graphic page always shows trend curve of the measurement of the 1st page / 1st line, see
Fct. C6.3.2
Select:
Manual (set range in Fct. C6.5.2) /
Automatic (automatic depiction based on the measured values)
Reset only after parameter change or after switching off and on.
C6.5.2
Range
Set the scaling for the Y axis. Only available if “Manual” is set in C6.5.1.
±xxx ±xxx%; range: -100 - +100%
(1st value = lower limit / 2nd value = upper limit),condition: 1st value
≤
2nd value
C6.5.3
Time Scale
Set the time scaling for the X axis, trend curve
xxx min; range: 0 - 100 min
6.4.3 Menu C, Setup, continued
