LG Pro:Centric 43UT570H Скачать руководство пользователя страница 42

Страница: 42 / 98

206-4341

Installer Menu (Cont.)

Note:

Values 10 & 11 are only available if item 041 SIMPLINK EN

is set to 1 (enabled).

Note:

If a SIMPLINK-enabled device is connected to the TV

and item 041 SIMPLINK EN is set to 1 (enabled), the SIMPLINK

device Audio Mode will have priority over the setting of this item

when the TV is turned ON.

053 - DIS. CH-TIME (Disable Channel-Time Display)

Set to 1 to disable the TV’s native Channel-Time display when a

custom channel label/channel information will be provided by the

MPI command. Set to 0 to enable the TV’s native Channel-Time

display.

069 - EN. CH-T COL. (Enable Display Characters Custom Color)

Set to 1 to enable custom color for MPI display characters. Set to

0 to disable custom color for MPI display characters.

070 - FOR. CH-TIME (Display Characters Foreground Color)

Set the foreground color for MPI display characters according to

the following color chart:
0 = Black

2 = Green

4 = Red

6 = Yellow

1 = Blue

3 = Cyan

5 = Violet

7 = White

If the foreground and background colors for the display characters

are the same, the background will be transparent.

Note:

This item and item 071 BCK. CH-TIME also apply to the

“Channel Not Available” message if item 073 CH NOT AVBLE is

set to 1 (enabled).

Note:

Items 070 FOR. CH-TIME and 071 BCK. CH-TIME are only

available in the Installer Menu when item 069 EN. CH-T COL. is

set to 1.

071 - BCK. CH-TIME (Display Characters Background Color)

See description for item 070 FOR. CH-TIME above. The color

chart is the same for both items.

073 - CH NOT AVBLE (Channel Not Available)

If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL

NOT AVAILABLE” message is displayed when a user attempts to

direct tune a channel that is not included in the channel lineup.

Note:

This item is not available in the Installer Menu when item

028 CH. OVERIDE is set to 1.

Note:

This item is only applicable when the TV is in PTC-CTV

Mode.

075 - REVERT CH (Revert to Start Channel)

If set to 1 and loss of MPI communication occurs, the TV auto-

matically tunes to the specified Start Channel.

Note:

This item is not available in the Installer Menu when item

004 STRT CHANNEL is set to 255.

078 - UPN MSB (UPN Most Significant Byte)

User programmable number, most significant byte readable by

MPI command. Note: Not linked to serial number.

079 - UPN MSB-1 (UPN Most Significant Byte-1)

User programmable number, most significant byte-1 readable by

MPI command. Note: Not linked to serial number.

080 - UPN MSB-2 (UPN Most Significant Byte-2)

User programmable number, most significant byte-2 readable by

MPI command. Note: Not linked to serial number.

081 - UPN LSB (UPN Least Significant Byte)

User programmable number, least significant byte readable by

MPI command. Note: Not linked to serial number.

082 - CHKSM ERROR (Checksum Error)

Enforces rigid MPI checksum validation. Set to 1 for validation.

Set to 0 to disable (does not check checksum on MPI async port).

SPI is always checked.

083 - HANDSHK TIME (Handshake Time)

Determines the MPI timing requirement of the (STB’s) MPI

command to follow the end of the transmission of the (display’s)

MPI Status Response. Value range is 0 to 5. Changing from

default may affect communication via MPI.

(Handshake Time = 25.5 ms + [25.5 ms x item value])

084 - PERMANENT BLK (Permanent Block)

Allows Parental Control blocking schemes to be permanent by

disabling the user’s ability to limit blocking hours in the Function

Menu. Set to 1 to install Parental Control restrictions permanently.

Set to 0 for user-specified hours control of blocking schemes. See

also item 022 MAX BLK HRS.

Note:

This item is not available in the Installer Menu when item

021 V-CHIP is set to 0.

088 - EN NOISE MUTE (Enable Noise Mute)

Applicable for analog channels only. If set to 1, audio mutes if no

signal is present.

090 - KEY LOCK

If set to 1, Key Lock is enabled, which means that the display

panel power button function will be locked, i.e., non-functional.

Set to 0 to disable Key Lock. Note that all IR features remain

functional regardless of this setting.

091 - HDMI2 ENABLE

Set to 1 to enable HDMI 2 input in DTV Mode. Set to 2 to enable

HDMI 2 input in PC Mode. Set to 0 to disable display panel HDMI

2 input.

Содержание Pro:Centric 43UT570H



































































































Результаты поиска

Содержание Pro:Centric 43UT570H

Отзывы:

Похожие инструкции для Pro:Centric 43UT570H

Бренды по названию

Популярные бренды

LG Pro:Centric 43UT570H, Руководство по установке

Результаты поиска

Содержание Pro:Centric 43UT570H

Отзывы:

Похожие инструкции для Pro:Centric 43UT570H

Бренды по названию

Популярные бренды