28
206-4341
(Continued from previous page)
IP Configuration
a) In the Media Type field, use the Left/Right arrow keys to select
IP
.
Note:
When you select “IP” as the Media Type, the default RF Data Channel and Signal
Strength/Quality fields are replaced with Server Address, IP Type, IP Address, and IP Port
fields.
b) The Server Address field provides the option to specify the domain name of the Pro:Centric
server instead of the server’s IP address. Use the Left/Right arrow keys to select the desired
option—IP Address or Domain Name—for defining the server.
c) Depending on your selection in the previous step, either:
• Select the appropriate IP type (either IPv4 or IPv6) in the IP Type field, and then enter the
Pro:Centric server IP address in the IP Address field. The IP address must match the IPv4
or IPv6 (as applicable) address that is set in the Pro:Centric server.
• Enter the Pro:Centric server domain name in the Domain Name field. Note that in order
for the domain name to be resolved to an IP address, there must be a DNS entry for the
domain name.
For each data entry field: Use the arrow keys to select the field and press
OK
. Then, you
can either use the number keys on the Installer Remote to direct enter data values, or you
can use the arrow keys to select the appropriate number(s)/alphanumeric character(s) from
the pop-up virtual keyboard displayed at the bottom of the screen. When you are done, select
Enter
from the virtual keyboard, and then press
OK
on the Installer Remote.
Note:
For an IPv6 IP address, you must use the colon “:” key from the virtual keyboard to
separate each group.
d) Enter the Pro:Centric server port number in the IP Port field. The port number must match the
port number that is set in the Pro:Centric server.
4. Once all fields are completed as required, you have two options:
• To save the data entered and exit the wizard, use the arrow keys to select the
X
button at the
top right of the screen, and then press
OK
. In the subsequent pop-up confirmation window,
select
SAVE & EXIT
, and then press
OK
once more. The Pro:Centric application and/or E-Z
Installation data will be downloaded to the TV at a later time. This option is useful, in particular,
if the Pro:Centric server has not yet been configured.
• To initiate a real-time download of Pro:Centric application and/or E-Z Installation data, use the
arrow keys to select
SEARCH
and press
OK
to verify the configuration data provided in step 3.
When the data is verified, the “SEARCH” button becomes a “NEXT” button. Select
NEXT
and
press
OK
to continue (see also note below).
Note:
With RF configuration, Pro:Centric server data must be present on the RF channel
selected as the TV’s Data Channel in order for you to select “NEXT” (you will see a
“Data Channel Found” message below the Signal Quality indicator). With IP configuration,
Pro:Centric server data must be present via the wired LAN cable connection in order for you to
select “NEXT” (you will see a “IP Server Found” message below the IP Port field).
EZ-Manager Wizard (Cont.)
(Continued on next page)
