LG Pro:Centric 43UT570H Скачать руководство пользователя страница 43

Страница: 43 / 98

206-4341

Installer Menu (Cont.)

092 - HDMI3 ENABLE

Set to 1 to enable HDMI 3 input in DTV Mode. Set to 2 to enable

HDMI 3 input in PC Mode. Set to 0 to disable display panel HDMI

3 input.

093 - RJP AVAILABLE (Remote Jack Pack Available)

•

0 = Remote jack pack is not available or disabled.

•

1 = Legacy Model RJPs: HDMI Mode

Enables RJP feature for use with full cable bundle models.

In this mode, when an HDMI source is connected to the RJP,

both digital video and audio are expected via the HDMI cable. If

no digital audio is present, no audio will be heard.

•

2 = Legacy Model RJPs: DVI Mode

Enables RJP feature for use with full cable bundle models.

In this mode, when an HDMI/DVI source is connected to the RJP,

only digital video is expected via the HDMI cable. Analog audio

is provided via a separate cable, from the source, connected to

an RJP AUDIO IN. If no analog audio cable is connected, tuner

audio will be heard.

•

5 = Scaler Model RJPs: HDMI Mode

Enables RJP feature for use with reduced cable bundle models.

In this mode, when an HDMI source is connected to the RJP,

both digital video and audio are expected via the HDMI cable. If

no digital audio is present, no audio will be heard.

•

6 = Scaler Model RJPs: DVI Mode

Enables RJP feature for use with reduced cable bundle models.

In this mode, when an HDMI/DVI source is connected to the RJP,

only digital video is expected via the HDMI cable. Analog audio

is provided via separate cable, from the source, connected to

an RJP AUDIO IN. If no analog audio cable is connected, tuner

audio will be heard.

Note:

See also Reference section, “RJP Model List & Input Auto-

sensing Hierarchy.” Settings 1, 2, 5, and 6 allow the lodge staff to

customize each TV’s RJP setup based on customer requirements.

Note:

When this item is enabled in the Installer Menu, item 042

AUTO INPUTS is automatically set to 0.

094 - SAP MENU EN (2nd Audio Program)

Set to 1 to enable the SAP feature in the Function Menu (i.e.,

the TV is not in Pass-through Mode). Set to 0 to disable the SAP

feature in the Function Menu.

096 - DEF. ASP. RATIO (Default Aspect Ratio)

Selects the aspect ratio to be set as default each time the TV is

turned ON:
0 = Set By Program

1 = 4:3

2 = 16:9 (default)

3 = Just Scan

4 = Zoom

Note:

See also item 106 ASP RATIO LOCK. This item (i.e., item

096) is not available in the Installer Menu when item 106 is set to 1.

097 - AUDIO OUTPUT

Determines availability and signal type/level (fixed speaker,

variable speaker, or fixed line level [amplifier]) of the audio output to

be used by external audio equipment connected to the SPEAKER

OUT / LINE OUT jack on the TV. Set to 0 to disable audio output.

Otherwise, see the table below and set as required in accordance

with audio equipment. See also Reference section, “External

Stereo Speaker Specifications.”

Value

Status

Speaker Output

Fixed 0.01 Watts

Fixed 0.03 Watts

Fixed 0.05 Watts

Fixed 0.10 Watts

Fixed 0.20 Watts

Fixed 0.50 Watts

Fixed 1.00 Watt (default)

Control with volume

Line Output

Fixed line level (typically 400 mVrms ±

100 mVrms @10KΩ) output

098 - PRO:CENTRIC

Selects the Pro:Centric Application Mode. Set to 0 (default) to

disable the Pro:Centric application. Set to 2 for GEM (Java

Application) Mode. Set to 3 for HTML Mode.
Once you exit the Installer Menu, turn OFF the TV for at least one

minute to initiate the Pro:Centric application download. When

you turn the TV back ON, wait several minutes to allow the TV to

load the Pro:Centric application after the initial download. Then,

press the PORTAL key on the Installer Remote, and verify that the

Pro:Centric application appears on the display.

Note:

This item is not available in the Installer Menu when item

119 DATA CHANNEL is set to 0.

099 - BACK LIGHTING

Sets the TV screen brightness. Default setting is 255.

•

1 (dimmest picture) – 100 (brightest picture) Static Back Lighting

•

101 (dimmest picture) – 200 (brightest picture) Dynamic Back

Lighting: The TV automatically controls back lighting depending

upon the picture level of the current program.

•

201 Automatic Static Back Lighting: The TV automatically

controls back lighting by using Intelligent Sensor to detect the

level of ambient lighting.

•

202 Automatic Dynamic Back Lighting: The TV automatically

controls back lighting by using Intelligent Sensor to detect the

level of ambient lighting and depending upon the picture level

of the current program.

Содержание Pro:Centric 43UT570H



































































































Результаты поиска

Содержание Pro:Centric 43UT570H

Отзывы:

Похожие инструкции для Pro:Centric 43UT570H

Бренды по названию

Популярные бренды

LG Pro:Centric 43UT570H, Руководство по установке

Результаты поиска

Содержание Pro:Centric 43UT570H

Отзывы:

Похожие инструкции для Pro:Centric 43UT570H

Бренды по названию

Популярные бренды