LG Pro:Centric 43UT570H Скачать руководство пользователя страница 76

Страница: 76 / 98

206-4341

Reference: FTG Mode via EBL (Local Configuration) (Cont.)

(Continued from previous page)

Note:

If Installer Menu item 118 POWER SAVINGS is set to 3 (default), the TV must be ON in order for

steps 5 and 6 to be successful.

5. (Optional) Since the application is no longer being updated with new model profiles, these model

are unknown to the application, which means that it is not possible to use the FTG Installer Menu

Configuration Utility to change Installer Menu items.

Therefore, if you would like to make any changes to the Installer Menu items, access the Installer

Menu on the TV and make the desired/applicable changes to the items BEFORE configuring the EBL

for FTG Mode in the next step.

6. “Write” the FTG Channel Map to the EBL (switches the EBL from Pass-through Mode to FTG Mode).

Note:

After a “Write” of new data, the TV will briefly display a green text banner that shows the EBL

firmware version and release date.

7. “Read” the current FTG Installer Menu settings from the EBL using the FTG Installer Menu

Configuration Utility.

Note:

When you “Read” the settings from the EBL, a pop-up notice will be displayed (see example

below) to indicate that the chassis ID of this model is unknown and so a generic Installer Menu profile

will be loaded. Click

to dismiss the pop-up window and continue. The resulting “generic” profile

contains all Installer Menu items, including a number of items that may not be applicable for this model.

Refer to the Installer Menu section of this document for detailed information on Installer Menu items

that are specific to the UT570H/UT577H.

8. Save the FTG Channel Map and FTG Installer Menu settings to an FTG Configuration (.rml) file for

future use.

9. Tune the TV to a logical channel in the FTG Channel Map.

Note:

For information on remote management using an FMA, refer to the appropriate Installation &

Configuration document for the FMA in use. For example, for an FMA-LG102, refer to the

FMA-LG102

Installation & Configuration Guide

Содержание Pro:Centric 43UT570H



































































































Результаты поиска

Содержание Pro:Centric 43UT570H

Отзывы:

Похожие инструкции для Pro:Centric 43UT570H

Бренды по названию

Популярные бренды

LG Pro:Centric 43UT570H, Руководство по установке

Результаты поиска

Содержание Pro:Centric 43UT570H

Отзывы:

Похожие инструкции для Pro:Centric 43UT570H

Бренды по названию

Популярные бренды