29
206-4341
EZ-Manager Wizard (Cont.)
(Continued from previous page)
If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with
the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric
Configuration screen example on page 25). When the Pro:Centric configuration is complete, an
EZ-Manager Configuration Complete screen (see example on page 26) is displayed, and after 10
seconds, the wizard exits, and the TV turns OFF.
Note:
With the EZ-Manager Configuration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select
TURN OFF
or
REBOOT
, respectively, and then press
OK
on
the Installer Remote.
USB Configuration
TV Manager / USB download options enable you to download configuration, boot logo (splash
screen) image, or software files individually from a USB memory device to the TV. You can also use
the Ez Download utility available from the menu to select multiple types of files to be downloaded
at one time using one process.
Each of the USB download functions requires that you have the appropriate file(s) loaded on a USB
memory device. If you wish to perform a software update or download a boot logo image file, the
software/image file(s) must be stored in a folder named “LG_DTV” in the root directory of the USB
memory device. Clone/Configuration (.tlx) files should simply be stored in the root directory of the
USB device.
The procedure below assumes the desired file(s) is/are already loaded onto the USB device. For
further information on the TV Manager / USB download options and file requirements, and/or for
information on creating Clone/Configuration (.tlx) files, refer to the appropriate section(s) in this
document.
Before You Begin
• If you intend to use the Zoning feature on this TV, make sure to set the appropriate TV Zone
# in the EZ-Manager’s Zone, Label, and Room Number screen BEFORE continuing with USB
Configuration. See “TV Configuration Options” on page 21 for further information.
• Ensure the USB device to be used has been formatted with FAT format.
• When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames.
• Refer to “Ez Download Utility” on pages 31 to 34 for further information on the Ez Download utility.
• Refer to “Custom Master TV Setup” on pages 46 to 48 for information on creating a Clone (.tlx)
file, and/or refer to “Creating an FTG Configuration File” on pages 55 to 57 for information on
creating an FTG Configuration (.tlx) file for FTG Mode via CPU configuration.
• See Reference section, “Downloading a Boot Logo Image using a USB Memory Device,” for
boot logo image guidelines.
• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further
information on software updates.
