10. Installation
Indoor unit
30
_
Wall Mounted Unit (Standard)
Indoor Units
n
SV chassis
Chassis Cover
Right
Back side view
Tubing holder
Backwards
Left
Pipe Port
1. Open the panel of the indoor unit.
2. Remove the chassis cover from the unit by loosing 5
screws.
3. Pull back the tubing holder.
4. Remove the pipe port cover and position the piping.
Bad case
Good case
Installation Information. For right piping. Follow the
instruction above.
CAUTION
h
The feature can be changed according to type of model.
1. Following bending case from right to left direct-
ly may cause damage to the tubing.
1. Press on the tubing cover and unfold the tub-
ing to downward slowly. And then bend to
the left side slowly.
Содержание ARNU48GBRZ4
Страница 1: ...Indoor unit R410A 0CVP0 03A Replaces 0CVP0 02A P No MFL55028429 ...
Страница 2: ...Indoor unit Introduction General Information Indoor Units Dip Switch Group Control Setting ...
Страница 353: ...Indoor unit 6 _ Fresh Air Intake Unit Indoor Units 5 Wiring Diagrams BR Chassis B8 Chassis ...