Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 747/1568
7.6.2.11
ip rip authentication
This command sets the RIP Version 2 Authentication Type and Key for the specified interface. The value
of <type> is either
none
,
simple
, or
encrypt
.
The value for authentication key [key] must be 16 bytes or less. The [key] is composed of standard
displayable, non-control keystrokes from a Standard 101/102-key keyboard. If the value of <type> is
encrypt, a keyid in the range of 0 and 255 must be specified.
Syntax
ip rip authentication {none | {simple <key>} | {encrypt <key> <keyid>}}
no ip rip authentication
none -
This command uses no authentication.
simple -
This command uses simple authentication for RIP authentication .
encrypt -
This command uses MD5 encryption for RIP authentication.
<key> -
16 alpha-numeric characters to be used for authentication key.
<keyid> -
a value in the range of 0
– 255 to be used for MD5 encryption.
no -
This command sets the default RIP Version 2 Authentication Type.
Default Setting
None
Command Mode
Interface Config
