Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 842/1568
7.12.2.5 is-type
To set ISIS router capability.
Syntax
is-type {level-1 | level-1-2 | level-2-only}
no is-type
level-1:
Router performs only Level 1 (intra-area) routing. This router learns only about destinations
inside its area.
level-1-2:
Router performs both Level 1 and Level 2 routing. This router runs two instances of the
routing process. It has one link-state packet database (LSDB) for destinations inside the area (Level
1 routing) and runs a shortest path first (SPF) calculation to discover the area topology. It also has
her LSDB with link-state packets of all other backbone (Level 2) routers, and runs another SPF
calculation to discover the topology of the backbone, and the existence of all other areas.
level-2-only:
Routing process acts as a Level 2 (interarea) router only. This router is part of the
backbone, and does not communicate with Level 1-only routers in its own area.
no -
This command set router type to level-1-2.
Default Setting
level-1-2
Command Mode
Router ISIS mode.
7.12.2.6 lsp-gen-interval
To set LSP minimum general interval time in second.
Syntax
lsp-gen-interval {<1-120> | level-1 <1-120> | level-2 <1-120>}
no lsp-gen-interval
no -
This command set LSP minimum general interval time to default value.
Default Setting
5
Command Mode
Router ISIS mode.
