Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1026/1568
11
Web-Based Management Interface
11.1
Overview
The Layer 3 Network Switch provides a built-in browser software interface that lets you configure and
manage it remotely using a standard W eb browser such as Microsoft Internet Explorer or Netscape
Navigator. This software interface also allows for system monitoring and management of the Network
Switch. W hen you configure this Network Switch for the first time from the console, you have to assign
an IP address and subnet mask to the Network Switch. Thereafter, you can access the Network Switch
’s
Web software interface directly using your W eb browser by entering the switch
’s IP address into the
address bar. In this way, you can use your W eb browser to manage the Switch from any remote PC
station, just as if you were directly connected to the Network Switch
’s console port.
The 8 menu options available are: Management, Switching, Security, QOS, Routing, IPv6, IPv4
Multicast, IPv6 Multicast and Data Center.
1.
Management Menu:
This section provides information for SNMP and trap manager, User
management, System utility including system time, defining system parameters including telnet
session and console baud rate, etc, File management including downloading switch module
software and configuration file, and resetting the switch module switch statistics, SNTP, LLDP,
UDLD, CDP, DHCP client, DNS Relay and DDNS.
2.
Switching Menu:
This section provides users to configure switch interface (port), DHCP Snooping,
VLAN, Protected Ports, Protocol-Based VLAN, IP Subnet-based VLAN, MAC-based VLAN,
MAC-Based Voice VLAN, Voice VLAN, Filters, GARP, Dynamic Arp Inspection, IGMP Snooping,
IGMP Snooping Querier, MLD Snooping, MLD Snooping Querier, Port Channel, Multicast
