Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1500/1568
11.7.9.3
Configuring RIPv6 Redistribution Configuration Page
This screen can be used to configure the RIPv6 Route Redistribution parameters. The allowable values
for each fields are displayed next to the field. If any invalid values are entered, an alert message will be
displayed with the list of all the valid values.
Configurable Data
Configured Source
- This select box is a dynamic selector and would be populated by only those
Source Routes that have already been configured for redistribute by RIPv6. However, the topmost
option in the select box would be "Create", and this allows the user to configure another, among the
Available Source Routes. The valid values are
-
Create
-
Static
-
Connected
-
OSPF
Available Source
- This select box is a dynamic selector and would be populated by only those
Source Routes that have not previously been configured for redistribution by RIPv6. This select box
would appear only if the user selects "Create" option as Configured Source. The valid values are
-
Static
-
Connected
-
OSPF
Metric
- Sets the metric value to be used as the metric of redistributed routes. This field displays the
metric if the source was pre-configured and can be modified. The valid values are 1 to 15.
Command Buttons
Submit
- Send the updated configuration to the router. Configuration changes take effect
immediately.
Delete
- Delete the entry of the Source Route selected as Configured Source from the list of Sources
configured for RIPv6 Route Redistribution.
