Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 718/1568
7.3.2.33
distance ospf
distance ospf
command sets the route preference value of OSPF in the router. Lower route
preference values are preferred when determining the best route. The type of OSPF route can be intra,
inter, or external. All the external type routes are given the same preference value. The range of
<preference> value is 1 to 255.
no distance ospf
command sets the default route preference value of
OSPF routes in the router. The type of OSPF can be intra, inter, or external. All the external type
routes are given the same preference value.
Syntax
distance ospf {intra-area <1-255> | inter-area <1-255> | external <1-255>}
no distance ospf {intra-area | inter-area | external}
Default Setting
110
Command Mode
Router OSPF Config Mode
7.3.2.34
distribute-list out
Use
distribute-list out
command to specify the access list to filter routes received from the
source protocol.
no distribute-list out
command to specify the access list to filter routes received from the
source protocol.
Syntax
distribute-list <1-199> out {rip | bgp | static | connected}
no distribute-list <1-199> out {rip | bgp | static | connected}
Default Setting
None
Command Mode
Router OSPF Config Mode
