Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 871/1568
8.2.2.6
ip igmp query-max-response-time
This command configures the maximum response time interval for the specified interface, which is
the maximum query response time advertised in IGMPv2 queries on this interface.The time interval
is specified in tenths of a second.
Syntax
ip igmp query-max-response-time <0-255>
no ip igmp query-max-response-time
<0-255> -
The range for <0-255
>
is 0 to 255 tenths of a second.
no -
This command resets the maximum response time interval for the specified interface, which
is the maximum query response time advertised in IGMPv2 queries on this interface to the default
value. The maximum response time interval is reset to the default time.
Default Setting
100
Command Mode
Interface Config
8.2.2.7
ip igmp robustness
This command configures the robustness that allows tuning of the interface. The robustness is the
tuning for the expected packet loss on a subnet. If a subnet is expected to have a lot of loss, the
Robustness variable may be increased for the interface.
Syntax
ip igmp robustness <1-255>
no ip igmp robustness
<1-255> -
The range for <1-255
>
is 1 to 255.
no -
This command sets the robustness value to default.
Default Setting
2
Command Mode
Interface Config
