Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 693/1568
Area Mismatch:
The number of OSPF packets discarded because the area ID in the OSPF
header is not the area ID configured on the ingress interface.
Invalid Destination Address:
The number of OSPF packets discarded because the packet
’s
destination IP address is not the address of the ingress interface and is not the AllDrRouters
or AllSpfRouters multicast addresses.
Wrong Authentication Type:
The number of packets discarded because the authentication
type specified in the OSPF header does not match the authentication type configured on the
ingress interface.
Authentication Failure:
The number of OSPF packets dropped because the sender is not an
existing neighbor or the send
er’s IP address does not match the previously recorded IP address
for that neighbor.
No Neighbor at Source Address:
The number of OSPF packets dropped because the sender is
not an existing neighbor or the sender
’s address does not match the previously recorded IP address
for that neighbor.
Invalid OSPF Packet Type:
The number of OSPF packets discarded because the packet type
field in the OSPF header is not a known type.
Hellos Ignored:
The number of received Hello packets that were ignored by this router from the
new neighbors after the limit has been reached for the number of neighbors on an interface or on
the system as a whole.
